DUAL DRIVE - two channels DISTORTION
Most guitarists know how complicated it can be to switch between clean, crunchy and distorted sounds on stage. If you set your amp to a crunchy sound and use a distortion pedal for solos, you don’t have a clean option. If you run you amp clean and use a distortion pedal for solos, the only way to back down from full distortion is to lower the volume on your guitar – and lose most of your tone.
MEET THE T-REX DUAL DRIVE
The T-Rex Dual Drive solves this problem by giving you two separate channels of vintage T-Rex gain. Two channels means you can easily switch between a clean sound from your amp, a nice edgy overdrive from Channel A on your Dual Drive and a thick warm distortion from Dual Drive’s Channel B. It’s like having two pedals in one – and it gives you total control over your sound.
NEW TONE CONTROLS
With the T-Rex Dual Drive, total control runs deep. Of course you can set the amount of gain for each channel (the gain level for Channel B picks up where Channel A leaves off), but you also get pair of individually tuned tone controls – one for each channel – so you shape the timbre of your overdrive and your distortion to create your own signature sound.
two channels of glorious T-Rex gain
- Two channels of meaty distortion
- Quick and easy switching between channels
- Built-in gain boost in ch. 2 for wider range of sounds
- True Bypass switching
TECH SPECS
Input impedance @ 1KHz | Higher than 1M Ohm |
---|---|
Output impedance @ 1KHz | Lower than 1K Ohm |
Power supply | 9V DC (T-Rex FuelTank) |
Minimum power supply voltage | 8,5V DC |
Maximum power supply voltage | 12,5V DC |
Current draw @ 9V DC | 50 mA |
Maximum input signal V p-p | 3V p-p |
Battery type | 9V battery 6F22 |
Battery life | 6-9 hours |
External connectors | input jack, output jack, 9V DC jack |
Controls | on/off, A/B switch, gain A, gain B, level A, level B, tone A, tone B |
Pedal size incl. knobs (W x H x D) | 100 x 55 x 120 mm / 3,9 x 2,2 x 4,7 inch |
Weight excl. packaging | 0,335 kg / 11,8 oz |